Is there a way to test a Carrier control board 17B0009N19
#1
Member
Thread Starter
Join Date: Nov 2019
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Is there a way to test a Carrier control board 17B0009N19
Carrier climate master control board model number 17B0009N19
#3
Welcome to the forums.
I see from nothing to very little online information on that board. It's either a specialty board or out of production. There are several ebay dealers selling them.
The only way to test the board is installed and under operation.
I see from nothing to very little online information on that board. It's either a specialty board or out of production. There are several ebay dealers selling them.
The only way to test the board is installed and under operation.
#4
I have seen that board on split system Geothermal heat pumps that have a Carrier sticker on them but that's a Climatemaster board.
The FP1 and FP2 sensor errors are rarely the board.
You can short across the 2 test terminals to bring up past error codes.
Are you getting an error code at this time?
The FP1 and FP2 sensor errors are rarely the board.
You can short across the 2 test terminals to bring up past error codes.
Are you getting an error code at this time?