I am trying to install some kitchen cabinets, I have remodeled a couple of simple kitchens before, both galley style kitchens where the cabinets are just on opposite walls. I am now trying to replace cabinets in a kitchen where the cabinets are at what I believe to be a 45* angle. I have one cabinet set in place (a 9" wide one) that sits to the right of the 45* angle wall, but I cannot get the other cabinet to line up with the first cabinet. I get them both level and square to the wall, but the ends of each cabinet are not level with the other one. The top will be 1/4" further out than the bottom. What are the steps to make sure the cabinets end up properly? Also, I need to cut a filler piece that goes between the cabinets, Do i need to cut a 22.5* on each side of the filler piece to get it to match on each side? I have attached pictures of the old cabinets. Sorry, they are gross. This was a rat infested hoarders house. In the bottom cabinet picture you can see the small cabinet and the larger one side by side. That's what I am trying to replicate.

Hi All, I need suggestions on raising a counter top without raising the whole vanity,I have to go up approx. 5” once the old top is removed. Geo