Retrofitting cabinet for over the range microwave

Reply

  #1  
Old 01-27-18, 05:20 AM
B
Member
Thread Starter
Join Date: Jan 2018
Location: USA
Posts: 2
Received 0 Votes on 0 Posts
Retrofitting cabinet for over the range microwave

I have an over the range microwave and have only one location to mount it. Unfortunately the wood that makes up the bottom of the cabinet is extremely thin and not strong enough to support the microwave.

My plan was to remove the bottom of the cabinet, install a thicker piece of plywood, make it flush with the bottom of the cabinet and install new support brackets underneath.

Is this a viable plan?

here are images of the location, the bottom of the cabinet and the staples that are attaching the existing shelf to the cabinet.

Edit: i can't figure out how to post the pictures.
 
Sponsored Links
  #2  
Old 01-27-18, 06:29 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 26,017
Received 675 Votes on 624 Posts
I doubt that removing the bottom of the cabinet is a good idea.

Generally most wall cabinets will have a face frame, and it creates a recessed cavity on the bottom. If this is the way your cabinets are, I would recommend that you simply cut a piece of 3/4" plywood to fit inside this recessed area, use a few kreg pocket holes on each side, and screw it to the bottom perimeter of your cabinet with a little glue and 1 1/4" pocket screws.

Your microwave should have a metal plate that goes on the wall... This holds the half the weight of the microwave so that its not all on the cabinet bolts.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: