[left]What width(s) do most cabinet guys use and why? I’m building my own kitchen cabinets and I’ll be making my own raised panel doors with concealed hinges and I don’t remember what the stiles should be to make it work right. I’m thinking of using 1 1/2” stiles and rails so that when I build drawers I can just slap 3/4” scrap on the inside of the cabinets to screw the drawer slides to. Thoughts?[/left]

So I took off the old kitchen cabinets to do a complete redo on them. I had stripped, sanded. primed, sanded. and painted. I had to special order the hinges since they were 5/8 partial inset hinges. When I put the doors on I had encounter a problem. The doors wouldn't close right. I readjusted the hinges and made sure they were positioned correctly. I still have the issue where one door will close both not both. If you get both door close together and close them together at the same time they will close however they stick like they are stuck close. I am thinking it is due to paint and possible hinges. The old hinges didn't wrap around the back of the door like the new ones. I could try to sand down the edges and re paint them. I have thought of using another hinge but can't think of any that would work with a 5/8 partial inset and 1" thick doors. Any thought would be helpful. Thanks [attach]104882[/attach] [attach]104883[/attach] [attach]104884[/attach]