Cut Out Curb on driveway


  #1  
Old 06-02-19, 12:24 PM
W
Member
Thread Starter
Join Date: Dec 2009
Location: USA
Posts: 33
Upvotes: 0
Received 0 Upvotes on 0 Posts
Cut Out Curb on driveway

I have an extension at the back of my driveway, however when it was poured no one removed the part of a concrete curb that extends out. So if I pull a car in I usually have to go up and over the curb. I cut out most of this using an angle grinder and a diamond wheel but I couldnít cut it flush due to the safety guard and the mounting bolt underneath. What would be the way to go to flush cut or grind the remaining amount? I havenít seen any sort of cupped diamond cutter, just wheels.
 
  #2  
Old 06-02-19, 01:16 PM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 28,390
Received 2,327 Upvotes on 2,069 Posts
I'm not understanding how you can't use your angle grinder and diamond wheel? That is what I would use to do the finishing grinding to smooth everything out and make it look good.
 
  #3  
Old 06-02-19, 01:25 PM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,319
Received 1,979 Upvotes on 1,774 Posts
Generally you want to have the city do this, or find a contractor that has an attachment on his skid loader for it. Any concrete repair company.

You could do it with a cup wheel on a grinder but it would take forever. If you haven't seen cup wheels you haven't looked very hard.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: