Right Bolt for 4"x4" saddle in Sono Tube


  #1  
Old 10-23-19, 03:15 PM
O
Member
Thread Starter
Join Date: Dec 2006
Location: Canada
Posts: 692
Received 3 Votes on 3 Posts
Right Bolt for 4"x4" saddle in Sono Tube

So I am building a small stair landing and I am attempting to bolt up my 4x4s on the steel saddles on top of my sono tubes.

Not giving it enough thought I bought a couple of 1/2" carriage bolts to go through the saddle holes and the wood. Well carriage bolts have those little squares on their flat head, that prevent the head from sitting flat on the saddle. The square part does not go through the round hole.

Anyway, does anyone know the correct bolt to bolt the 4x4s to the saddles.
 
  #2  
Old 10-23-19, 08:56 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 61,872
Received 1,480 Votes on 1,368 Posts
If the saddle metal is thin and the square part starts into the hole...... tightening the bolt will draw the head in. Otherwise you'll need to measure what length galvanized 1/2" bolts you need. Probably 1/2"x4" or 1/2"x4-1/2"
 
  #3  
Old 10-24-19, 02:22 PM
W
Member
Join Date: Feb 2006
Location: USA
Posts: 6,769
Received 32 Votes on 29 Posts
Hex head bolts do not have the square shoulders.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: