Need to find new rollers for sliding patio door
#1
06-21-19, 05:02 PM
Join Date: Jun 2019
Location: United States
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Need to find new rollers for sliding patio door
This is from a sliding patio door roller in a home in Los Angeles, CA built in the 1950s. Anyone seen this before? Anyone know where I can find a replacement? this was tract housing so all homes in the area should have this type of slider. HELP!
Last edited by PJmax; 06-22-19 at 09:48 PM. Reason: cropped/resized pictures
#2
06-21-19, 05:09 PM
Group Moderator
No way to tell based only on photos. This isn't it, but it might give you a start... start comparing measurements and you might find something that could work.
https://www.swisco.com/Pella-Glass-D...Rollers/81-244
https://www.swisco.com/Pella-Glass-D...Rollers/81-244
Norm201
voted this post useful.
#3
06-21-19, 06:43 PM
Member
If Swisco can't supply it, then this is a prime example of a 3D printer. I have saved many doors and screen for customers by manufacturing corners for repair. I currently have about 20 templates at my disposal. When I quit, I wonder what the store and customers are going to do. 
#4
06-22-19, 05:37 AM
Member
I doubt if you'll find the housing but you might find the wheel and axle. https://www.swisco.com/srch?q=steel+...%20%26%20Axles
