Appliance repair manuals

Our Bosch Nexxt 500 clothes dryer door seems to have sagged and is scraping the plastic trim piece on the top front of the dryer. I've removed the door but don't see any way to adjust the door alignment. The door hinge bracket has two guide pins that lock the hinge in one fixed position. The recesses on the door that accommodate the hinge pins also don't seem to allow any adjustment. How do I adjust the alignment of the front door? Or could the plastic trim piece have shifted and is causing the problem?

I have a compact, stacked washer and dryer set in an apartment. Plumbed for hot and cold into the washer. There's also an outflow pipe that the washer hose goes into. So far, no problem. See setup picture below. But the compact condenser dryer drains water as as well. I would love to be able to put the dryer outlet hose into the drainpipe (somehow share the drainpipe with the washer hose). Otherwise, the condenser dryer collects the water in an internal reservoir, and we have to dump out the water each time. Much much preferable to drain it down the pipe. Our hook up looks like below. Is there some sort of Y-shape adpater that will accept two hoses into it and outflow down through one? [IMG]https://removeandreplace.com/wp-content/uploads/2014/10/washer-drain-hose.jpg[/IMG]