Just installed: GE WB44X5082 Bake Element for Self Cleaning GE, Hotpoint, and RCA Ovens On initial test, the element immediately began smoking at same location that the old element failed. See attached pic. Shut off oven ASAP. Is this a defective element, with coincidence of defect at previous location? OR Does this indicate another problem is causing element failures (if that's even possible)? Thanks for your time!

We bought this house one year ago and I found the manuals in a folder that says LG Fridge 2016. It is a French Door Refridgerator LMXC23746. Although I dislike the layout of the fridge and the space to get into the freezer, it has worked well for the 13 months we have been here. I noticed it was not working correctly when there was water on the floor. I traced it to the ice maker in the door. The ice was melting and dripping out. Opened the freezer and found that the meat I had put in the day before was cool still but not frozen. I double checked all the settings and put the freezer down to -6, hoping maybe the door was just cracked open a bit overnight. Checked both the freezer and fridge throughout the day and confirmed both were not cooling. Read through the manual last night and hoped for the best this morning. Confirmed this morning that it is not cooling. Read through the manual again. Unplugged. removed the back lower panel to vacuum the coils and plugged it back in. Fan by the coils started and everything sounds pretty quiet, nothing unusual. I put the panel back on and set the timer for 2 hours. Trying to not open the fridge during that time and hoping again it will start to cool. My next step will be to try the LG number in the manual to transmit codes through the phone. Has anyone had that phone call code system work? Any other thoughts besides calling someone. Thank you.