Stove throwing codes

Old 12-31-22, 04:16 AM
Thread Starter
Join Date: Oct 2006
Location: USA
Posts: 17
Upvotes: 0
Received 0 Upvotes on 0 Posts
Stove throwing codes

I owned an Amana glass top stove. I recently put it to the trash because abought a month ago only one of the five burners worked. I dealt with that until about three days ago the stove totally shut down and displayed this code:F9E0. I bought a new GE glass top yesterday. After installing the three-prong cord and plugging it in, I turned on the stove and oven and nothing worked. There was power being supplied because the power indicator lit up. The burners would not ignite and the oven did not work either. This stove also displayed a code:H06 Ld6. If anyone has an idea of the possible cause please help. Thanks
Old 12-31-22, 01:34 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 65,783
Received 4,122 Upvotes on 3,702 Posts
Without model numbers we'd be guessing.
Are these 240v appliances ?
The old one may have run off 240v.
The new one should be 120/240v requiring four wires.
You may have just one leg of the 240v power. The electronics would still run as what is supposed to be ground is being as a neutral. Each appliance comes with specific installation manual that should be followed.

Check for 240vac.

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: