Simulate Electrical Fence
#1
08-11-16, 03:46 PM
Join Date: Aug 2016
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Simulate Electrical Fence
I am trying to simulate the electrical signal that an electrical fence gives off in order to test a device I am shooting a commercial for which tests for hot electrical fences.
Is there a way I can easily simulate the voltage of an electrical fence at home without buying expensive fencing equipment?
Thanks!
Eric
Is there a way I can easily simulate the voltage of an electrical fence at home without buying expensive fencing equipment?
Thanks!
Eric
#2
08-11-16, 03:52 PM
Group Moderator
An electric fence is a pulsed high voltage charge.
Similar to the spark plug on a small engine.
Put your tester near the boot of a spark plug. That would be a similar test.
Similar to the spark plug on a small engine.
Put your tester near the boot of a spark plug. That would be a similar test.
#3
08-11-16, 05:11 PM
Group Moderator
Our electric fence puts out about 14,000 volts, much higher than standard house voltage. PJ is correct, the voltage from a spark plug would be similar to an electric fence.
BTW a fence charger can be had starting at $40.
BTW a fence charger can be had starting at $40.
Last edited by PJmax; 08-11-16 at 10:44 PM. Reason: changed 14,000K to 14,000
