Hello All, We were power washing the house yesterday w/ an electric power washer and after a time the machine quit. It draws 14.5 amps and I thought it tripped a breaker, however none showed tripped. I checked the outlet w/ a tester and only the white light lit denoting the open neutral?? weird ... it just worked 10 min. prior. This is an outside outlet that does not have a gfi outlet and is in the back of the house where we were washing. The outlet in the front of the house has also gone off showing the same status (open neutral). I dont know which breaker it is connected to and cant find out w/ a breaker detector because the device you plug in does not light up?? vol 1.. how to tell which outlet is problem? 2.. I ordered a fluke volt alert last night and will check outlet when it comes in. 3.. Why all of a sudden does this outlet show open neutral? 4.. how do I check "upstream" if this outlet checks out ok? Any help / direction here will be greatly appreciated. Thank you, cvbs

[COLOR="#0000FF"]Member is in Switzerland .[/COLOR] I'm installing a ceiling fan. This black part will go against the ceiling. [ATTACH]82594[/ATTACH] And this is the top of the fan. [ATTACH]82595[/ATTACH] There's one short ground wire screwed directly to the metal tube that supports the fan and another ground wire that goes all the way to the motor. I'm a bit puzzled by these two ground wires. Could anyone let me know which one I will have to connect where? Thanks!