I have an old dc motor from a food processor and I need some help to wire it up to use it. there are 5 wires: Blue White Black [color=#333333]Yellow[/color] Red Starting with the blue wire there is a capacitor and resister in parallel attached to a coil at the side of the motor. the coil then turns into the white wire (2 of them) one just goes off to a connector, the other goes to a black thing at the end of the axle. I think it is a brush or something? there are coils all over the axle and another brush thing on the other side of the axle. The second brush goes to the red wire which goes out to nothing. the yellow wire goes to a coil opposite of the axle to the first coil. the coil then ends in the black wire. It'd be great to be able to use this motor for some stuff. also I have been wondering if it is possible to run it off of a car battery (24V), I know its not what it says on the motor which I think is "220-240 V" but I'm not sure as it is kind of hard to read. thanks in advance :)

The motor has 4 wires, black white red and yellow coming from the windings along with 2 blue wires from another part of the windings , how do I wire this motor and what are the T #'s of the colored wires?