I have a Husky Air Compressor, model WL650703AJ, that recently stopped turning off at 125 lbs. It doesn't turn off automatically at all now. I replaced the pressure switch thinking that had to be the problem. I also found the ground prong on the electrical plug had broken off and replaced that as well. It still will not turn off automatically. What else on this thing would cause it to not turn off? Thanks, Jim

Hi all, I just bought an "as-is" air compressor on Craigslist and am working through some issues. First the pressure switch was wired wrong so it kept blowing the circuit breaker immediately. I rewired the pressure switch according to the diagram and it started right up. Next it runs for about 15 seconds and then blows the little overload button on the motor (sometimes called a clixon). That's where I am currently stuck. I changed the compressor pump oil, which was pretty low and pretty dirty, but it made no difference. the tank pressure does begin to rise in the few seconds that it is running. What should I do next?