I am in the market for a miter saw and would like to get some input on a 7 1/4 vs 10 inch. The saw would be used for general DIY jobs around the house and would get light to moderate use. Portability is somewhat of an requirement, it will need to be carried up a flight of basement stairs to go outside occasionally . Upcoming jobs are stair hand rails for the garage and deck using a 4 x 4 post , and replacement of 5/4 x 6 " trim. Currently considering the Kobalt 7 1/4 an 10 inch. The 7 1/4 looks like it has a decently powerful motor from the videos I have seen, which is typically a problem with the small saws.

I'm looking to buy a 3/8" air hose reel with 25' hose for my garage. It's been a while since I've purchased air parts, so I'm looking for some recommendations. For instance, what brands are the best, which ones to avoid (Cox Reels, Reelcraft, Speedaire). I thought of going with a 50' hose, but I really don't need that much length. Plus I don't want any more pressure drop than I can help. I see seemingly similar ones ranging from $79 to $300 even amongst the same brand. Not clear what the difference is. BTW, the reel will be wall mounted, and the reel/housing needs to be all metal (no plastic). If I find one I like with a 50' hose, can I swap the hose with a 25' or is the hose a fixed to the reel? How critical is it that the fittings on the reel are 3/8" (I see some with 3/8" hoses that have 1/4" fittings)? Seems like 3/8" hose should have 3/8" fittings.