Vista-20P Zone Type 11-19 not available


  #1  
Old 05-02-17, 12:41 PM
P
Member
Thread Starter
Join Date: May 2017
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
Vista-20P Zone Type 11-19 not available

Hello, while trying to revive an old Safewatch 3000/20P system and configure two new 5800CO detectors the keypad (6160) is not allowing me to enter any zone type from 11 - 19. I've had success with this panel and programming other devices in the past.
Any ideas? Thank you
 
  #2  
Old 05-02-17, 02:53 PM
P
Member
Thread Starter
Join Date: May 2017
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
Well I think I've figured most of it out.

As it turns out I believe this ADT provided system is actually a 20SE and not a 20P. It could be something other than a 20se but I'm calling it that. From what I can tell the zone types I can't use (11-19) are not included in the 20se, also both keypads are on address 31, which I believe is also the case with the 20se.

That being said, that will certainly explain why I can't assign zone type 14 to the CO detectors. For what I have to work with is there really any issue assigning zone type 09 for a CO detector?
 
  #3  
Old 05-02-17, 07:00 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 15,525
Received 289 Upvotes on 265 Posts
If it's a "Safewatch 2000" then it's a Vista 20se with the partition feature disabled.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: