Figuring brick mold angles
#1
Member
Thread Starter
Join Date: Feb 2012
Location: USA
Posts: 56
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Figuring brick mold angles
I have a single garage door that has that 45 degree angle and I have to replace the brick mold. Not sure if I can use the old brick mold angle. Is there a method for figuring out such angles? Thanks.
#2
Member
Brick Moulding
Your post is not completely clear. Do you mean that the upper corners have two 45 degree angles? If so, cut the brick moulding at 22.5 degrees.
#3
Member
Replacing with PVC brick molding I hope.
The easiest way to remove the old is to drive in the nails with a small nail set as far as you can then remove it with a flat bar.
The easiest way to remove the old is to drive in the nails with a small nail set as far as you can then remove it with a flat bar.
#5
Member
We still don't know if the existing angle is ninety degrees, in which case each cut is forty five degrees or if the existing s forty five in which case the cuts ar twenty two.five