How long of run can a copper pipe be from a black iron pipe.


  #1  
Old 05-14-24, 05:42 PM
Z
Member
Thread Starter
Join Date: May 2024
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
How long of run can a copper pipe be from a black iron pipe.

The fireplace and dryer are split off a 1/2 pipe using copper line to the fireplace which is approximately 15ft long Is this to code or good enough to run both at the same time?
 
  #2  
Old 05-15-24, 04:28 AM
B
Member
Join Date: Oct 2015
Location: Ct.,USA
Posts: 3,390
Received 322 Upvotes on 284 Posts
Confused. Could you provide line diagrams showing current piping and what you want?
 
  #3  
Old 05-15-24, 05:06 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 28,386
Received 2,326 Upvotes on 2,068 Posts
I assume you are talking about running a gas line?

I do not know of any codes limiting the length of permanently installed gas lines. You do need to properly size your gas line for the length of run.
 
  #4  
Old 05-15-24, 12:43 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 65,993
Received 4,154 Upvotes on 3,730 Posts
Average consumption........
A dryer 25k Btu and a gas fireplace can be 30k - 40k Btu...... that's 65k Btu.

Your are on the border.
What did that 1/2" connect to.... something larger ?
 
  #5  
Old 05-20-24, 09:18 AM
Z
Member
Thread Starter
Join Date: May 2024
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
Straight run

The pipe is basically a straight run. It starts as a 3/4" by the hot water heater then reduces to 1/2". Splits into two smaller copper lines from the 1/2" to the dryer and fireplace. One copper run is 8ft the other 15ft.
 
  #6  
Old 05-20-24, 08:02 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 65,993
Received 4,154 Upvotes on 3,730 Posts
You have a 3/4" line feeding two 1/2" copper lines.... how ?
A tee at the end of the 3/4" ?
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: