Large tree branch removal question

Reply

  #1  
Old 09-10-19, 07:20 PM
R
Member
Thread Starter
Join Date: May 2008
Location: Arizona
Posts: 30
Received 0 Votes on 0 Posts
Large tree branch removal question

One of my pecan trees had a bad blight last year. A couple of large limbs have been dead for about a year now. I want to cut them off, but I want to use a hand saw.

I am posting to ask if anybody can recommend a particular saw or particular type of saw that will do best the job on hard pecan. I need to cut two limbs, about twelve inches in diameter.
 
Sponsored Links
  #2  
Old 09-11-19, 03:50 AM
B
Member
Join Date: Oct 2015
Location: Ct.,USA
Posts: 1,782
Received 88 Votes on 77 Posts
I recommend a battery powered chain saw. Make 2 cuts per limb. The first cut is 1 foot from the trunk. The second cut is at the trunk. The weight of the 1 foot section is not large enough to tear the 1 foot limb from the trunk before the cut is complete.
 
  #3  
Old 09-11-19, 04:34 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 23,746
Received 631 Votes on 583 Posts
If climbing a tree I prefer to use a hand pruning saw. It's safer than handling a chainsaw in a tree and if the saw is sharp it can cut quickly and easily. For limbs larger than about 9" I use a chainsaw but I'm always using it while standing on a stable surface.
 
  #4  
Old 09-11-19, 07:04 AM
A
Member
Join Date: Jan 2013
Location: U.S.A.
Posts: 2,079
Received 67 Votes on 61 Posts
By hand, definitely a pruning saw. They have more aggressive teeth wider kerfs for dealing with green wood. If you can get close to the cuts you can get one that fits your hand. Or you can buy the same type of blade on a pole, conveniently known as a pole saw, so that you can reach them from the ground or across from maybe a more stable limb. Either one is available at your local hardware, big box, or garden center.
 
  #5  
Old 09-11-19, 07:10 AM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 6,557
Received 371 Votes on 346 Posts
You dont mention how high up the branches are but cutting a 12" dia branch with a hand saw /hand pole saw is going to be nearly impossible plus I would not want to be anywhere near that branch when it decides to come down.

I would seriously suggest a gas powerd pole saw or get a local company to come out and take them down for a couple hundred dollars!
 
Northern Mike voted this post useful.
  #6  
Old 09-11-19, 10:16 AM
B
Member
Join Date: Oct 2008
Location: New England
Posts: 10,513
Received 37 Votes on 34 Posts
Pictures would help.

*****

Bud
 
  #7  
Old 09-11-19, 02:32 PM
W
Member
Join Date: Feb 2006
Location: USA
Posts: 6,709
Received 19 Votes on 18 Posts
Do not stand on a ladder while you are cutting the limb.
 
  #8  
Old 09-11-19, 03:09 PM
H
Member
Join Date: Nov 2012
Location: USA
Posts: 1,754
Received 95 Votes on 84 Posts
One of my pecan trees had a bad blight last year. A couple of large limbs have been dead for about a year now. I want to cut them off, but I want to use a hand saw.

I am posting to ask if anybody can recommend a particular saw or particular type of saw that will do best the job on hard pecan. I need to cut two limbs, about twelve inches in diameter.
What do you mean by hand saw?
- Bow-saw (doable with a new blade)
- Pruning saw (bit of work)
- Pole saw (heck of a workout)

How high up is it?
Is it mostly horizontal or mostly vertical?
Is there anything valuable that the branch can hit?

When you're cutting a dead branch, you basically remove material until you have 1 of 2 common cross-sections of remaining wood-

1- vertical ▌ the remaining wood will usually fail suddenly; "pop" so that the entire branch drops straight down, tips and base hit the ground at the same time.
2-horizontal ▬ this will usually fail slowly and "flop" so that the tips droop to the ground first, then the base drops as you finish the cut.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: