I am hanging a bathroom vanity mirror, and I need some help. I removed the old frameless mirror, and I thought that I would use the molly bolts that are already in place. They are on the left and right sides. My issue is that I don't know what type of hook to use. I have a mirror mounting kit, and nearly all of the hooks seem to be secured with a nail. There is one stud directly in the center, so I did put a hook there. I placed it at the same level as the molly bolts, but I'm thinking that may be too low. I am using wire, so I assume that the wire will be slightly higher in the center. Also, is it okay for the d-rings to point upwards? I saw something online, and they mentioned that they should be pointed inwards (towards each other). I appreciate any assistance.

Not sure when this happened but the laminate covering the frame has let go, only the top piece. There is fair amount of tension so I doubt contact cement will hold. Any idea what type of adhesive would have originally been used? [url]https://www.doityourself.com/forum/attachment.php?attachmentid=92676&stc=1&d=1524224658[/url]