Underground sprinkler problems
#1
06-15-19, 07:20 AM
Underground sprinkler problems
So I have 6 zones my system and every year I fire it up and a new issue. This year the problem is that all zones come on except zone 5 and 6 but if I put it on a three minutes test or manual zones 5 and 6 work fine just not on auto. I checked start times and run times and made sure b and c programs were clear and only have A programmed any ideas
#2
06-15-19, 08:58 AM
Group Moderator
Welcome to the forums.
Thread moved to the outdoor landscaping forum.
From what you are describing...... it sounds like an "assignment to group" problem.
Try programming the B program with all the zones and see if 5 and 6 work then.
Thread moved to the outdoor landscaping forum.
From what you are describing...... it sounds like an "assignment to group" problem.
Try programming the B program with all the zones and see if 5 and 6 work then.
