Ceiling Fan and Light with two switches


  #1  
Old 10-09-22, 07:14 PM
I
Member
Thread Starter
Join Date: Dec 2017
Location: United States
Posts: 27
Received 0 Upvotes on 0 Posts
Ceiling Fan and Light with two switches

I have a Hunter Avia II ceiling fan with receiver going to two wall switches. From the wall switches, I'm able to turn on//off the light and fan separately with no issues. On the remote I can turn the fan on/off and also control the fan speed. However I can't turn off the light from the remote and it's only controlled by the wall switch. I have tried every combination of connecting wires and still not having any success. This is very minor but it would be nice to have the light controlled by the remote as well as the light switch, without affecting the fan that is currently working. Below is how my current wiring is. Any help would be appreciated. Thanks

 
  #2  
Old 10-10-22, 06:57 AM
J
Member
Join Date: Sep 2002
Location: welland ontario
Posts: 8,372
Received 475 Upvotes on 391 Posts
You can't do both wall switch and receiver for the light. If you want the remote to control the light connect the blue wire from the fan to the blue wire from the remote and cap the red wire from the wall.
The fan switch needs to be always on to provide power to the remote for the fan and the light.
Your switch labeling is reversed for fan and light.
 
imnobobvila1 voted this post useful.
  #3  
Old 10-10-22, 07:45 PM
I
Member
Thread Starter
Join Date: Dec 2017
Location: United States
Posts: 27
Received 0 Upvotes on 0 Posts
Thanks that's very helpful.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: