Simplicity, Kohler control cables


  #1  
Old 12-10-17, 06:30 AM
W
Member
Thread Starter
Join Date: Apr 2003
Location: Ohio
Posts: 2,404
Received 43 Upvotes on 39 Posts
Simplicity, Kohler control cables

Too long a story as to why it took so long, but I had to remove an engine on a 1978 Simpliciity landlord that tied up during snow duty last winter. I just got the engine back, and I don't remember how the trottle cable and cable support hooked to the engine after all this time. I should have taken a picture, but didn't, I can figure it out, but since it has a new carb on it now, (part of the problem last year was a throttle plate that was sucked into the engine,) The hook up is escaping me. This engine is a Kohler 241-S same year. Any clues for me in web land? The choke was simple and operating, throttle has a cable, and an L shaped bracket about 2 inches long with a bolt hole in it.
 

Last edited by WML13; 12-10-17 at 06:31 AM. Reason: spelling
  #2  
Old 12-10-17, 06:21 PM
W
Member
Thread Starter
Join Date: Apr 2003
Location: Ohio
Posts: 2,404
Received 43 Upvotes on 39 Posts
Simplicity Kohler Control Cables

After I got it jacked up so I could see it better I could see where the bracket went, and how the throttle was connected. It connects under the carb to the governor control levers, rather than to the carb itself.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: