Wiring Ignition Switch


  #1  
Old 12-10-18, 12:57 PM
M
Member
Thread Starter
Join Date: Jun 2014
Location: USA
Posts: 71
Upvotes: 0
Received 0 Upvotes on 0 Posts
Wiring Ignition Switch

What do the letters stand for on my ignition switch

A

R

I

B

S

I’m trying to wire it up correctly now.

I had to run all new wires.

It’s on a John Deere 214.

I need to know where to hook the wire that goes to the solenoid, where to hook the lights, where to hook the charging wire from stator, pretty much what wires coming from what hook up to the switch?

Here’s the diagram I’m using.



Thanks.
 
Attached Images  
  #2  
Old 12-10-18, 01:03 PM
M
Member
Thread Starter
Join Date: Jun 2014
Location: USA
Posts: 71
Upvotes: 0
Received 0 Upvotes on 0 Posts
Here’s the diagram.

Please help

Thanks.
 
Attached Images   
  #3  
Old 12-10-18, 01:04 PM
A
Member
Join Date: Jan 2013
Location: U.S.A.
Posts: 1,902
Received 73 Upvotes on 66 Posts
My initial thought would be Auxiliary, Run, Ignition, Battery, and Start, but would also check it out with an ohmmeter to make sure that made sense.
 
  #4  
Old 12-10-18, 06:28 PM
M
Member
Thread Starter
Join Date: Jun 2014
Location: USA
Posts: 71
Upvotes: 0
Received 0 Upvotes on 0 Posts
I found this online. Hope it’s correct. I got it running today by just trying pins and wires. I’ll check how I did tomorrow with this.
 
Attached Images  
  #5  
Old 12-30-18, 06:05 PM
M
Member
Thread Starter
Join Date: Jun 2014
Location: USA
Posts: 71
Upvotes: 0
Received 0 Upvotes on 0 Posts
Yep. That info worked. All is good.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: