Sealer recommendation for kid's table


  #1  
Old 07-24-17, 07:27 PM
C
Member
Thread Starter
Join Date: Apr 2014
Posts: 193
Received 0 Upvotes on 0 Posts
Question Sealer recommendation for kid's table

I just bought a small unfinished table that will be an activity table for my kid. The plan is to stain it Weathered Gray (with a little brown mixed in) and then seal it.

My problem is you can fit my sealing experience into a thimble and I always seem to chose the wrong one. So I'm open to recommendations - I'd like something that will potentially stand up against repeated banging from a one-year-old and ideally won't yellow the finish.

Any suggestions are really appreciated!
 
  #2  
Old 07-25-17, 03:01 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,643
Received 832 Upvotes on 729 Posts
Oil base poly [or varnish] will deepen the colors naturally in the wood and will yellow over time. Water based poly doesn't change the look any other than give it a sheen and will not yellow. Oil base is more durable than water based. It will take 2-3 coats of poly to get a decent finish, sand and remove dust between coats.
 
  #3  
Old 07-25-17, 03:53 AM
pugsl's Avatar
Forum Topic Moderator
Join Date: Mar 2008
Location: United States
Posts: 8,161
Received 77 Upvotes on 70 Posts
I generally use water based poly. i find it easier to use is to thin to about 50 - 50 mix with water. Spreads well with less bubbles. If you use oil based I do the same but with thinner. My problem with poly is streaks and bubbles thinning it seams to help. may have to use extra coat to get thickness you want.
 
  #4  
Old 07-25-17, 04:30 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,643
Received 832 Upvotes on 729 Posts
IMO thinning any coating 50% is too much. Most coating manufactures don't recommend thinning more than 10%. Using a quality brush tailored for the job/coating and sanding between coats goes a long ways toward to eliminating or reducing brush marks. Bubbles in poly are usually caused by either shaking the poly or stirring it over aggressively.
 
  #5  
Old 07-25-17, 08:15 AM
S
Group Moderator
Join Date: Oct 2004
Location: WI/MN
Posts: 19,119
Received 1,262 Upvotes on 1,203 Posts
Oil based poly is my go-to finish, applied as Mark relayed. If you're adamant about not changing the color, then water based poly. I don't thin either kind when using.
 
  #6  
Old 07-25-17, 10:51 AM
C
Member
Thread Starter
Join Date: Apr 2014
Posts: 193
Received 0 Upvotes on 0 Posts
Cool, thanks for all the helpful info. Since the table top has a larger surface area, you think it would be better to apply with a roller instead of a brush?
 
  #7  
Old 07-25-17, 11:36 AM
S
Group Moderator
Join Date: Oct 2004
Location: WI/MN
Posts: 19,119
Received 1,262 Upvotes on 1,203 Posts
I suppose you could. That said, I don't recall ever seeing someone pour poly into a roller pan....

I typically apply with a brush or, on smaller projects, a rag.
 
  #8  
Old 07-25-17, 12:02 PM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,643
Received 832 Upvotes on 729 Posts
Generally a brush will give a nicer finish but those with poor brushing skills often do better with a roller.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: