Rack-it lumber rack with rust


  #1  
Old 06-29-16, 07:33 PM
B
Member
Thread Starter
Join Date: Oct 2014
Posts: 210
Upvotes: 0
Received 5 Upvotes on 2 Posts
Rack-it lumber rack with rust

If these have rust on them, are they able to be saved - primed and painted - and still be structurally functional? Or once rust starts, the integrity of the structure is compromised?

I'm looking into getting one, but it has some rust.
 
  #2  
Old 06-29-16, 07:59 PM
C
Member
Join Date: May 2015
Location: USA
Posts: 3,157
Received 167 Upvotes on 135 Posts
If it's just surface rust with no big chunks of rusty metal falling off, you should be able to remove all the loose rust, prime with a rusty metal primer, and paint. Once a rack like that has seen any use at all it starts to rust (except for the aluminum ones). I've seen some with plenty of rust that were still perfectly functional.
 
  #3  
Old 06-29-16, 10:10 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,639
Received 3,898 Upvotes on 3,494 Posts
They also make rust convertor paints that convert the rust to a hard paintable surface.
 
  #4  
Old 06-30-16, 04:40 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,621
Received 824 Upvotes on 722 Posts
Rust conversion coatings work but it is still best to mechanically remove as much rust as possible first!
If the price is right I wouldn't be scared of surface rust.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: