DoItYourself.com Community Forums > Plumbing, Piping, Water Heating, Wells, Air & Water Filtration and Conditioning > Plumbing and Piping

Plumbing problems

Thread Tools

Search this Thread

01-07-18, 09:06 PM

Buckeye_fan

Member

Thread Starter

Join Date: Jan 2018

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

Plumbing problems

When i drain my tub or washing machine I have water blowing like a geyser from my bathroom sink drain. What is causing this?

Upvote

01-08-18, 03:50 AM

Norm201

Member

Join Date: Sep 2013

Location: United States

Posts: 10,855

Upvotes: 1,727

Received 703 Upvotes on 625 Posts

Sounds like a clogged vent pipe.

Upvote

01-08-18, 05:28 AM

pugsl

Forum Topic Moderator

Join Date: Mar 2008

Location: United States

Posts: 8,161

Upvotes: 5

Received 77 Upvotes on 70 Posts

Drain pipe to street clogged.

Upvote

01-10-18, 04:20 PM

Zorfdt

Forum Topic Moderator

Join Date: Sep 2005

Location: USA

Posts: 6,020

Upvotes: 261

Received 406 Upvotes on 361 Posts

I agree, 99% chance your drain line is partially blocked. The drain line is filling up and backing up. Needs a good snaking!

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Plumbing and Piping
Leaking cast iron to PVC boot

A

abe_physics on Jan 07, 2018

One of the 2 stacks in my house has started leaking, and was discovered during a recent extreme cold spell (regularly -0 F) in Indiana. (short version of house: 1920 built house. countless remodels to subdivide... current one to restore to a single family home in progress by me). I'm not sure when the leak started, but it was discovered when the paint started bubbling on the wall in the 1st floor bathroom. Above the 1st floor bathroom is the 2nd floor bathroom. I opened up the ceiling access panel between the 1st and 2nd floor, and saw the rubber joint between the cast iron and PVC has started leaking. [ATTACH]89281[/ATTACH] Closeup: [ATTACH]89282[/ATTACH] Going to the basement, I discovered this: [ATTACH]89283[/ATTACH] The leak had flowed down the wall, froze as it went, and then accumulated frozen at the base of the stack. The stack runs along an uninsulated exterior wall. I chipped away and and put a space heater in to ensure the base-stack wouldn't freeze. As things thaw out (as they are doing now) I'll have a water logged drywall and insulation to tear out and replace, as well as the stack to repair. See main floor bathroom pic: [ATTACH]89284[/ATTACH] 2 questions: 1. Is having a drain stack on an uninsulated exterior wall ever ok, or should I move it? I could re-route to another drain stack that goes to another bathroom on the 2nd floor (that's on an interior wall). 2. If I keep the drain stack, what's the recommendation to repair the joint? Replace the cast iron T with a PVC one, like [URL="https://www.doityourself.com/forum/plumbing-piping/553339-installing-pvc-wye-into-cast-iron-stack.html"]this[/URL]? I'm not sure the cast iron T is advisable to keep using as there's evidence of past leaks...Read More
Plumbing and Piping
All new plumbing and faucet- low pressure- sprayer not working

K

Kaosazure on Jan 11, 2018

We just bought a twenty year old mobile home and replaced all the plumbing and installed a new Moen 4 piece kitchen faucet. Our water pressure is very low with the hot and cold lines and the sprayer doesn't work at all. All the other faucets are work fine and the water pressure is great. I looked for the answer on the moen site but I didn't find a answer there. Any ideas that can help? By the way, no leaks or blockages and everything is brand new from pipes to faucetRead More

Ask a Question