why is there leaking at hose attachment?

Reply

  #1  
Old 06-02-19, 07:41 PM
S
Member
Thread Starter
Join Date: Mar 2019
Location: Canada
Posts: 99
Received 1 Vote on 1 Post
why is there leaking at hose attachment?

I just purchased a hose reel and it came with a 3 foot hose that attaches to my outside faucet. Nothing leaks until I shut off the water. When I shut off the water it starts leaking where the 3 foot hose (see image below) attaches to my faucet. Leaking lasts about one minute. I put about 3 layers of teflon tape around the threads and tightened with channel lock pliers, but it still leaks when water is shut off and especially when I'm winding up the garden hose. With every turn of the hose reel, water comes gushing out at the connection (see red arrow in image below). I can't figure this out as it doesn't leak when water is on. It only leaks when water is shut off for about a minute and when I'm reeling in the hose. Any ideas on what's happening here? Thanks.
 
Attached Images   
Sponsored Links
  #2  
Old 06-02-19, 08:28 PM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 25,985
Received 665 Votes on 615 Posts
That's a backflow preventer/vacuum breaker, and its perfectly normal. It opens up when the faucet is shut off to relieve pressure and ensure that water in the hose is not siphoned back into the water supply.

example
 
Shepweiler voted this post useful.
  #3  
Old 06-03-19, 04:40 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 23,685
Received 619 Votes on 572 Posts
Make absolutely certain that you remove the hose from the spigot BEFORE any freezing weather.
 
  #4  
Old 06-03-19, 06:42 PM
S
Member
Thread Starter
Join Date: Mar 2019
Location: Canada
Posts: 99
Received 1 Vote on 1 Post
Thanks I see those holes now
 
  #5  
Old 06-04-19, 06:21 AM
2
Member
Join Date: Jan 2014
Location: USA near Boston, MA
Posts: 828
Received 46 Votes on 39 Posts
especially when I'm winding up the garden hose
You can avoid that by keeping the valve turned on while you are winding the hose. Winding with the nozzle closed compresses the hose causing back pressure. By keeping the water pressure on while winding the hose will not be compressed. The water may still run out after the valve is closed due to the pressure in the hose. If you let the pressure out by opening the nozzle after the valve is closed it will stop "leaking" sooner.
 
Shepweiler voted this post useful.
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: