mounting glass sheet to burglar bars?
#1
03-19-19, 10:52 AM
mounting glass sheet to burglar bars?
hi guys,my window is leaking and due to time&money constrains i cannot renovate it currently.i was considering to protect it from rain by mounting a sheet if glass to the burglar bars.but as the glass is 15kg heavy i m wondering how to mount it....suggestions?for some reason i can t upload a picture of the burglar bars.....
#3
03-19-19, 06:29 PM
Group Moderator
Welcome in from South Africa. It's helpful to put non-US in your bio for us.
You are not going to be able to mount actual glass to your bars. Consider plexiglass or clear Lucite.
You are not going to be able to mount actual glass to your bars. Consider plexiglass or clear Lucite.
It appears I can unlock it with a key from the outside. It also appear I can lock it with a push button on the inside. But it appears there is no way I can lock it with a key from the outside. ALL FOUR LOCKS behave this way, so it can't be a defect, it must be something I am missing.
Also if I push the button in and turn the button 90 degrees it appears even after unlocking with a key, if I close it again it locks automatically. So that way it stays locked even after unlocking with a key. I can't find a way to lock it with a key from the outside.
In addition, one of the locks has a loose part. The door knob is a sphere. The bottom of the knob that small round piece is loose so it spins. I can't seem to find a way to tighten it. The other three locks do not have this issue. Is this fixable?
Here is a picture showing the gap between the loose piece and the knob, I can easily fit a flat head in the gap.
