Glacier bay toilet repair


  #1  
Old 01-08-17, 01:56 PM
J
Member
Thread Starter
Join Date: Jan 2017
Location: USA
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Glacier bay toilet repair

I have a one piece Glacier Bay toilet and I want to replace the valve and flapper. The fill valve is not a problem, but the flapper assembly is something I've never seen before and cannot identify parts. If you pick up the flapper, there are 3 brass screws that the assembly screws into. Does anyone know where to buy this flapper assembly? The toilet is from 2007. Thank you
 
  #2  
Old 01-08-17, 02:30 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 39,964
Likes: 0
Received 9 Likes on 8 Posts
Welcome to the forums! Technology changes, so could you post a picture or two of the inside of the tank for us so we can see what you see? Mostly all the one piece toilets are dual flush type. http://www.doityourself.com/forum/el...your-post.html
 
  #3  
Old 01-08-17, 03:17 PM
J
Member
Thread Starter
Join Date: Jan 2017
Location: USA
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Name:  image.jpg
Views: 1697
Size:  29.1 KB hopefully it's attached
 
  #4  
Old 01-09-17, 05:49 AM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 39,964
Likes: 0
Received 9 Likes on 8 Posts
The flapper should be independent from the base you are showing. The three screws hold the assembly down. The flapper should detach at the pivot point and a new one will pop right in. I see no need based on the picture to replace the lower part. Fluidmaster 3 in. Toilet Tank Flapper for Glacier Bay-5401GBP4 - The Home Depot
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: