toilet water inlet handle

Old 07-09-17, 11:51 AM
Thread Starter
Join Date: Feb 2013
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes on 0 Posts
toilet water inlet handle

I need to change the flapper and valve in the toilet tank, but cannot shut off the water. The shut-off handle will not budge and I do not want to damage the handle with a wrench. Any suggestions for getting the handle to move so I can turn off the water inlet? Thanks, Ron
Old 07-09-17, 11:59 AM
Join Date: Mar 2008
Location: Boulder, CO
Posts: 1,102
Received 8 Upvotes on 7 Posts
Don't force it. Try loosening the packing nut under the handle and see if that allows the stem to turn. I am assuming you have a normal compression stop on a copper stub. Worst case shut off house water and replace the stop with a 1/4 turn ball valve.
Old 07-09-17, 03:52 PM
Join Date: Dec 1999
Location: San Diego Ca. USA
Posts: 984
Upvotes: 0
Received 13 Upvotes on 11 Posts
Hi, You can change a flapper with out shutting the water off.

Thread Tools
Search this Thread
Ask a Question
Question Title: