DoItYourself.com Community Forums > Interior Flooring, Floor Coverings and Coatings Center > Wall and Flooring Indoor Tiling

Sealing tile edges

Thread Tools

Search this Thread

10-25-18, 06:40 AM

maarkr

Member

Thread Starter

Join Date: Mar 2014

Location: United States

Posts: 485

Upvotes: 13

Received 23 Upvotes on 20 Posts

Sealing tile edges

I installed tile in the kitchen backsplash wall and shower. What is the preferred method to seal the joints where the backsplash meets the cabinets and counter backsplash, and how about the edges at the top of the shower and where the tile meets the shower pan? Caulk or grout or ???

Upvote

10-25-18, 06:45 AM

marksr

Forum Topic Moderator

Join Date: Mar 2005

Location: USA - N.E.Tn

Posts: 45,500

Upvotes: 613

Received 800 Upvotes on 703 Posts

Use color matched caulking. Often I use regular white caulk at the top of the shower surround and paint it with the wall/ceiling.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Wall and Flooring Indoor Tiling
Unsquare bathroom tiling.

D

dgibbon13 on Oct 22, 2018

Hi there I have an unsquare bathroom. I have enclosed a picture of it with measurements. I will use a hardiebacker I'm just haven't laid it yet. My question is. What is my best course of action here. A-B and C-D width is the same but my lengths A and B are off by an inch. I have enclosed another picture of what the previous tilers did (it looks hacky to me) I really appreciate any help. Everything is labeled on pic. Thank you. here the pictures. https://postimg.cc/vgr7q4nC/f94033fc https://postimg.cc/R6Lf1j5B/ac34e24aRead More
Wall and Flooring Indoor Tiling
1970s bathroom remodel - thoughts?

P

pjg03d on Oct 29, 2018

Hello - great forum here! My wife and I are deciding what to do with our bathroom, in our house built in 1928. The bathroom was remodeled along with the kitchen some time in the 1970s, and the tile is starting to fall off the walls (in large sheets - tile adhesive seems to be failing). I am a light DIY-er and never done tile, so not sure what I am looking at. We are having a few contractors look as well while I try to self-teach how difficult this will be if I DIY it. Looking for some insight into what I am dealing with. My biggest concern is that I can't tell if anything was water-sealed behind the tile in the shower/tub stall. The tile and grout in there is failing as well. There is no good airflow in the room - no ventilation and the window does not open. Also wondering the best way to clean up the stains between the tiles on the floor - we'd like to keep the floor as-is since it's in fine shape and original to the house. All of the walls in the house are still the original plaster, and in pretty good shape. I'd like to avoid tearing everything down to the studs and drywalling/waterproofing the entire room if possible. I knocked down some tile yesterday to see what was underneath - it looks like some kind of backer board with a subway tile pattern (but the tile on top was square?), and it looks like the plasterboard and lathe ends where the tile begins. I can't tell if they replaced the plaster, where the tile was overlayed, with something else in the 70s when the room was remodeled. Here's a bunch of pictures. Any info would be appreciated! Floor with dirt/stains between tiles [url]https://i.imgur.com/HSZoYJT.jpg[/url] Baseboard - there was lint/fuzzy stuff behind the tile? [url]https://i.imgur.com/cnXQ1cP.jpg[/url] The wall where I knocked down about 4x3ft worth of tile [url]https://i.imgur.com/FZGrEVv.jpg[/url] Top of the tiled area, where tile trim met wallpapered plaster [url]https://i.imgur.com/X0IZRKB.jpg[/url] Zoomed out [url]https://i.imgur.com/lV7bgm2.jpg[/url] Zoomed further out - you can see the shower tiles are mildewed where I caulked temporarily to prevent water from getting behind failing grout [url]https://i.imgur.com/RDNEUFv.jpg[/url] Separate shot of the baseboard tile with dark linty stuff [url]https://i.imgur.com/z8NVKYO.jpg[/url] Zoomed out [url]https://i.imgur.com/ihguJlW.jpg[/url] Tub needs refinishing [url]https://i.imgur.com/UBNqgq7.jpg[/url]Read More

Ask a Question