Tile around outlets

Reply

  #1  
Old 12-12-19, 04:59 PM
B
Member
Thread Starter
Join Date: Jul 2005
Location: Pennsylvania
Posts: 518
Received 0 Votes on 0 Posts
Tile around outlets

We had ceramic tile installed on our backsplash today. When I came home I see this is how they cut around the outlets and switches. Is this right? The outlets will not sit flush against the tile. Maybe they shouldn't and this is standard? Or did cut corners (or not literally)

Name:  t1.jpg
Views: 78
Size:  26.4 KB

Name:  t2.jpg
Views: 80
Size:  31.0 KB
 

Last edited by PJmax; 12-12-19 at 05:37 PM. Reason: imported/resized pictures
Sponsored Links
  #2  
Old 12-12-19, 08:39 PM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 25,993
Received 667 Votes on 617 Posts
Boxes should have been moved out by you or an electrician to account for the tile thickness... not really the tile layers job. Legally he shouldn't even touch it unless he's licensed. And drywall screws are not the preferred screw... and they have bent the tabs out by tightening the screw too much, with no box behind to stop the screw. The solution is either a box extension or spacers behind the screws. (Round wall anchors cut to the right length work well) The outlets lay on the tile like that, but not with the tabs bent outward. Fix that and the cover will go on just fine.

I would think you would want to get new outlets, switches and covers anyway.
 
  #3  
Old 12-13-19, 02:34 AM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 6,525
Received 367 Votes on 342 Posts
That being said, what you have is very common when tile is installed and not really wrong.

You may find that the metal flanges of the switches may need to be bent some to lay flat but once you install the plates everything will line up.

Occasionally you will find a tile is proud causing a small gap on adjacent tiles, I've used caulk to fill those minor gaps to seal them up and make then look better!
 
  #4  
Old 12-13-19, 02:46 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 47,640
Received 316 Votes on 280 Posts
It looks like the tile overlaps the box [on the right side] of the 3 gang box which would make it difficult to install a box extension.
 
  #5  
Old 12-13-19, 11:46 AM
H
Member
Join Date: Jan 2006
Location: USA
Posts: 3,524
Received 7 Votes on 7 Posts
Use new outlets, switches and wall plates as has been already suggested. Don't overtighten the screws when installing the outlets and switches. Those drywall screws most likely have already ruined the threads in the boxes.
 
mossman voted this post useful.
  #6  
Old 12-13-19, 11:48 AM
M
Member
Join Date: Sep 2019
Location: Canada
Posts: 1,505
Received 157 Votes on 144 Posts
I would not worry about it as long as the switches and receptacle are secure.
Pretty well the norm when adding tile.
It is not like anything combustible in exposed.

The box with the switch does not look like it was installed correctly from day one so this may even be an improvement.

L
 
  #7  
Old 12-13-19, 04:29 PM
sam floor's Avatar
Forum Topic Moderator
Join Date: May 2010
Location: floor installer
Posts: 965
Received 15 Votes on 11 Posts
Tile guy should not be expected to handle the boxes. Not his job,
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: